Someone else is currently editing this document
Only one person can work on a document at a time
TRANSCRIPTION
Das Pressen.
Das Pressen wird zur Herstellung einer
glatten, mehr oder weniger glänzenden Oberfläche
der meisten Waren vorgenommen.
Es könnte auch das Polieren der Ware genannt
werden. Wie beim polieren anderer Gegenstände
durch zustopfen der Poren Glanz entsteht, so
geschieht dies in ähnlicher Weise wenn man
Stoffe zwischen glatten heißen Flächen zusammendrückt.
Die Wärme entzieht der
Wollfaser einen Teil ihrer Elastizität,
weshalb der Glanz der Ware auch nach Aufhörung
der Pressung, je nach der Warme Wärme
und Höhe des Druckes sich richtend, erhalten
bleibt. Dieser Pressglanz verliert sich erst
vollständig wieder, wenn das Wollhaar
durch Einwirkung von Feuchtigkeit seine
volle Elastizität wieder erlangt, dagegen
bleibt den Stoffen dieser Glanz auch nach
dem befeuchten mit Wasser oder Wasserdampf
wenigstens teilweise erhalten,
wenn dieselben aufgewickelt auf gelöcherte
Walzen (Eisen oder Kupfer) der
Einwirkung des Dampfes ausgesetzt sind.
Wie schon oben erwähnt, dient das Pressen
der verschiedenen Stoffe dazu, denselben
eine glatte, glänzende Oberfläche zu geben,
wodurch sie einerseits zum Dekatieren vorbereitet
(Vorpresse) anderseits aber dem
Auge des Käufers gefälliger gemacht wird.
(Fertigpresse). Zur Ergänzung schönen Glanzes
(Vorpresse) ist ein Dämpfen vor dem Pressen
von Vorteil, denn dadurch wird das Wollhaar,
welches aus Hornmasse besteht, viel
weicher und läßt sich leicht umformen
Language(s) of Transcription
LOCATION
Crimmitschau (50.8164, 12.3904)
Story Location
ABOUT THIS DOCUMENT
Document Date
Document Type
Document Description
Language of Description
Keywords
External Web Resources
People
STORY INFORMATION
Title
Schulheft “Appretur” aus der Crimmitschauer Web- und Appreturschule
Creator
Alfred Max Günther
Contributor
Sächsisches Industriemuseum Tuchfabrik Gebr. Pfau | Crimmitschau
Language
deu
de
Identifier
http://contribute.europeana.eu/contributions/88b844a0-9790-0138-75ad-6eee0af68290CRMUS_002
Country
Europe
DataProvider
Europeana Foundation
Provider
Europeana Foundation
DatasetName
125_Europe_at_work
Language
mul
Created
1909-01-01
2020-07-01T13:55:10.858Z
2020-07-01T13:55:16.800Z
Story Description
Schulheft “Appretur” der Web- und Appreturschule Crimmitschau von Alfred Günther (Sammlung Sächsisches Industriemuseum Tuchfabrik Gebr. Pfau, Crimmitschau, Inv.-Nr. 07084), Teil 4Schulheft “Appretur” der Web- und Appreturschule Crimmitschau von Alfred Günther (Sammlung Sächsisches Industriemuseum Tuchfabrik Gebr. Pfau, Crimmitschau, Inv.-Nr. 07084), Teil 5Schulheft “Appretur” der Web- und Appreturschule Crimmitschau von Alfred Günther (Sammlung Sächsisches Industriemuseum Tuchfabrik Gebr. Pfau, Crimmitschau, Inv.-Nr. 07084), Teil 1Schulheft “Appretur” der Web- und Appreturschule Crimmitschau von Alfred Günther (Sammlung Sächsisches Industriemuseum Tuchfabrik Gebr. Pfau, Crimmitschau, Inv.-Nr. 07084), Teil 2Schulheft “Appretur” der Web- und Appreturschule Crimmitschau von Alfred Günther (Sammlung Sächsisches Industriemuseum Tuchfabrik Gebr. Pfau, Crimmitschau, Inv.-Nr. 07084), Teil 3Alfred Günther besuchte die Web- und Appreturschule in Crimmitschau. Vermutlich absolvierte er dort eine Ausbildung zum Weber. Er hatte 1909/11 aber auch Unterricht im Fach “Appretur”. Damit ist die Veredelung der fertigen Stoffe gemeint, z.B. durch Reinigen, Walken und die Bearbeitung der Oberfläche. Günther führte sein Schulheft handschriftlich und fügte zur Illustration Abbildungen von Maschinen ein. Diese Bilder stammen aus Prospekten von Maschinenbau-Firmen, u.a. von der Crimmitschauer Firma “C. A. Moritz Schulze” und der Firma “Ernst Gessner” aus Aue.
TRANSCRIPTION
LOCATION
DESCRIPTION
PEOPLE
STORY INFO
TUTORIAL
Das Pressen.
Das Pressen wird zur Herstellung einer
glatten, mehr oder weniger glänzenden Oberfläche
der meisten Waren vorgenommen.
Es könnte auch das Polieren der Ware genannt
werden. Wie beim polieren anderer Gegenstände
durch zustopfen der Poren Glanz entsteht, so
geschieht dies in ähnlicher Weise wenn man
Stoffe zwischen glatten heißen Flächen zusammendrückt.
Die Wärme entzieht der
Wollfaser einen Teil ihrer Elastizität,
weshalb der Glanz der Ware auch nach Aufhörung
der Pressung, je nach der Warme Wärme
und Höhe des Druckes sich richtend, erhalten
bleibt. Dieser Pressglanz verliert sich erst
vollständig wieder, wenn das Wollhaar
durch Einwirkung von Feuchtigkeit seine
volle Elastizität wieder erlangt, dagegen
bleibt den Stoffen dieser Glanz auch nach
dem befeuchten mit Wasser oder Wasserdampf
wenigstens teilweise erhalten,
wenn dieselben aufgewickelt auf gelöcherte
Walzen (Eisen oder Kupfer) der
Einwirkung des Dampfes ausgesetzt sind.
Wie schon oben erwähnt, dient das Pressen
der verschiedenen Stoffe dazu, denselben
eine glatte, glänzende Oberfläche zu geben,
wodurch sie einerseits zum Dekatieren vorbereitet
(Vorpresse) anderseits aber dem
Auge des Käufers gefälliger gemacht wird.
(Fertigpresse). Zur Ergänzung schönen Glanzes
(Vorpresse) ist ein Dämpfen vor dem Pressen
von Vorteil, denn dadurch wird das Wollhaar,
welches aus Hornmasse besteht, viel
weicher und läßt sich leicht umformen
Das Pressen.
Das Pressen wird zur Herstellung einer
glatten, mehr oder weniger glänzenden Oberfläche
der meisten Waren vorgenommen.
Es könnte auch das Polieren der Ware genannt
werden. Wie beim polieren anderer Gegenstände
durch zustopfen der Poren Glanz entsteht, so
geschieht dies in ähnlicher Weise wenn man
Stoffe zwischen glatten heißen Flächen zusammendrückt.
Die Wärme entzieht der
Wollfaser einen Teil ihrer Elastizität,
weshalb der Glanz der Ware auch nach Aufhörung
der Pressung, je nach der Warme Wärme
und Höhe des Druckes sich richtend, erhalten
bleibt. Dieser Pressglanz verliert sich erst
vollständig wieder, wenn das Wollhaar
durch Einwirkung von Feuchtigkeit seine
volle Elastizität wieder erlangt, dagegen
bleibt den Stoffen dieser Glanz auch nach
dem befeuchten mit Wasser oder Wasserdampf
wenigstens teilweise erhalten,
wenn dieselben aufgewickelt auf gelöcherte
Walzen (Eisen oder Kupfer) der
Einwirkung des Dampfes ausgesetzt sind.
Wie schon oben erwähnt, dient das Pressen
der verschiedenen Stoffe dazu, denselben
eine glatte, glänzende Oberfläche zu geben,
wodurch sie einerseits zum Dekatieren vorbereitet
(Vorpresse) anderseits aber dem
Auge des Käufers gefälliger gemacht wird.
(Fertigpresse). Zur Ergänzung schönen Glanzes
(Vorpresse) ist ein Dämpfen vor dem Pressen
von Vorteil, denn dadurch wird das Wollhaar,
welches aus Hornmasse besteht, viel
weicher und läßt sich leicht umformen
English Translation
Transcription History
- 64 - Das Pressen. Das Pressen wird zur Herstellung einer glatten, mehr oder weniger glänzenden Oberfläche der meisten Waren vorgenommen. Es könnte auch das Polieren der Ware genannt werden. Wie beim polieren anderer Gegenstände durch zustopfen der Poren Glanz entsteht, so geschieht dies in ähnlicher Weise wenn man Stoffe zwischen glatten heißen Flächen zusammendrückt. Die Wärme entzieht der Wollfaser einen Teil ihrer Elastizität, weshalb der Glanz der Ware auch nach Aufhörung der Pressung, je nach der Warme Wärme und Höhe des Druckes sich richtend, erhalten bleibt. Dieser Pressglanz verliert sich erst vollständig wieder, wenn das Wollhaar durch Einwirkung von Feuchtigkeit seine volle Elastizität wieder erlangt, dagegen bleibt den Stoffen dieser Glanz auch nach dem befeuchten mit Wasser oder Wasserdampf wenigstens teilweise erhalten, wenn dieselben aufgewickelt auf gelöcherte Walzen (Eisen oder Kupfer) der Einwirkung des Dampfes ausgesetzt sind. Wie schon oben erwähnt, dient das Pressen der verschiedenen Stoffe dazu, denselben eine glatte, glänzende Oberfläche zu geben, wodurch sie einerseits zum Dekatieren vorbereitet (Vorpresse) anderseits aber dem Auge des Käufers gefälliger gemacht wird. (Fertigpresse). Zur Ergänzung schönen Glanzes (Vorpresse) ist ein Dämpfen vor dem Pressen von Vorteil, denn dadurch wird das Wollhaar, welches aus Hornmasse besteht, viel weicher und läßt sich leicht umformen
- 64 - Das Pressen. Das Pressen wird zur Herstellung einer glatten, mehr oder weniger glänzenden Oberfläche der meisten Waren vorgenommen. Es könnte auch das Polieren der Ware genannt werden. Wie beim polieren anderer Gegenstände durch zustopfen der Poren Glanz entsteht, so geschieht dies in ähnlicher Weise wenn man Stoffe zwischen glatten heißen Flächen zusammendrückt. Die Wärme entzieht der Wollfaser einen Teil ihrer Elastizität, weshalb der Glanz der Ware auch nach Aufhörung der Pressung, je nach der Warme Wärme und Höhe des Druckes sich richtend, erhalten bleibt. Dieser Pressglanz verliert sich erst vollständig wieder, wenn das Wollhaar durch Einwirkung von Feuchtigkeit seine volle Elastizität wieder erlangt, dagegen bleibt den Stoffen dieser Glanz auch nach dem befeuchten mit Wasser oder Wasserdampf wenigstens teilweise erhalten, wenn dieselben aufgewickelt auf gelöcherte Walzen (Eisen oder Kupfer) der Einwirkung des Dampfes ausgesetzt sind. Wie schon oben erwähnt, dient das Pressen der verschiedenen Stoffe dazu, denselben eine glatte, glänzende Oberfläche zu geben, wodurch sie einerseits zum Dekatieren vorbereitet (Vorpresse) anderseits aber dem Auge des Käufers gefälliger gemacht wird. (Fertigpresse). Zur Ergänzung schönen Glanzes (Vorpresse) ist ein Dämpfen vor dem Pressen von Vorteil, denn dadurch wird das Wollhaar, welches aus Hornmasse besteht, viel weicher und läßt sich leicht umformen
- 64 - Das Pressen. Das Pressen wird zur Herstellung einer glatten, mehr oder weniger glänzenden Oberfläche der meisten Waren vorgenommen. Es könnte auch das Polieren der Ware genannt werden. Wie beim polieren anderer Gegenstände durch zustopfen der Poren Glanz entsteht, so geschieht dies in ähnlicher Weise wenn man Stoffe zwischen glatten heißen Flächen zusammendrückt. Die Wärme entzieht der Wollfaser einen Teil ihrer Elastizität, weshalb der Glanz der Ware auch nach Aufhörung der Pressung, je nach der Warme Wärme und Höhe des Druckes sich richtend, erhalten bleibt. Dieser Pressglanz verliert sich erst vollständig wieder, wenn das Wollhaar durch Einwirkung von Feuchtigkeit seine volle Elastizität wieder erlangt, dagegen bleibt den Stoffen dieser Glanz auch nach dem befeuchten mit Wasser oder Wasserdampf wenigstens teilweise erhalten, wenn dieselben aufgewickelt auf gelöcherte Walzen (Eisen oder Kupfer) der Einwirkung des Dampfes ausgesetzt sind. Wie schon oben erwähnt, dient das Pressen der verschiedenen Stoffe dazu, denselben eine glatte, glänzende Oberfläche zu geben, wodurch sie einerseits zum Dekatierevorbereitet (Vorpressen) anderseits aber dem Auge des Käufers gefälliger gemacht wird.
Das Pressen.
English Translation
Exercise book “Finish” from the Crimmitschau weaving and finishing school by Alfred Günther (collection of the Saxon Industrial Museum of the cloth factory of the Pfau brothers, Crimmitschau, inventory no. 07084), part 4 || Exercise book “Finishing” from the Crimmitschau weaving and finishing school by Alfred Günther (collection of the Saxon Industrial Museum of the cloth factory of the Pfau brothers, Crimmitschau, inventory no. 07084), part 5 || Exercise book “Finish” from the Crimmitschau weaving and finishing school by Alfred Günther (collection of the Saxon Industrial Museum of the cloth factory of the Pfau brothers, Crimmitschau, inventory no. 07084), part 1 || Exercise book “Finishing” from the Crimmitschau weaving and finishing school by Alfred Günther (collection of the Saxon Industrial Museum of the cloth factory of the Pfau brothers, Crimmitschau, inventory no. 07084), part 2 || Exercise book “Finishing” from the Crimmitschau weaving and finishing school by Alfred Günther (collection of the Saxon Industrial Museum of the cloth factory of the Pfau brothers, Crimmitschau, inventory no. 07084), part 3 || Alfred Günther attended the weaving and finishing school in Crimmitschau. He probably completed his training as a weaver there. In 1909/11 he also had lessons in the subject “finishing”. This means the finishing of the finished fabrics, eg by cleaning, fulling and processing the surface. Günther kept his exercise book by hand and included pictures of machines for illustration. These pictures come from brochures from mechanical engineering companies, including the Crimmitschau company “CA Moritz Schulze” and the company “Ernst Gessner” from Aue.
Automatically Identified Enrichments
Verify Automatically Identified Enrichments
Verify Automatically Identified Locations
Verify Automatically Identified Persons
Enrichment Mode
Edit your workspace view by using the top-right menu.
You can have the white Activity Panel docked to the right (default) , to the bottom , or as an independent overlay . If you just want to view the image, you can hide the panel using the minimise button , and then re-open it with the pen button. Adjust the size and position of your Activity Panel according to your preferences.
You enrich documents by following a step-by-step process.
Make sure you regularly save your enrichments in each step to avoid the risk of losing your work.
Step 1: Transcription
To start a transcription, select the transcription tab at the top menu of the Activity Panel. Click inside the box underneath the heading TRANSCRIPTION and start writing your transcription. When needed, use the toolbar to format your text and to add special characters and tables. A guide to the transcription toolbar is available in the Formatting section of this tutorial.
Identify the language(s) of the text using the dropdown list under the transcription box. You can select multiple languages at once.
If the item has no text to transcribe, tick the checkbox ‘No Text’.
Once you have finished your transcription, click SAVE.
Step 2: Description
You can add a description to the item underneath the Transcription section.
The first task is to identify what type of document the item is: a handwritten or printed document, a postcard, photo, drawing and/or part of a diary. Tick the category which best applies to the item. Multiple categories can be selected at once.
The second task is to write a description of the contents. Click inside the box underneath the heading DESCRIPTION. Here, you can write what the item is, what it is about, and specify the images and objects that appear in the item.
Identify the language of the description text that you wrote using the dropdown list underneath. You can only select one language.
Once you have finished your description, click SAVE.
Step 3: Location
If you find a location mentioned or recognise a place in the item, you can create a geotag and pin it to the item map. Multiple locations can be attached to the item. To tag locations, select the tagging tab at the top menu of the Activity Panel. Click the plus next to the heading LOCATIONS. Type the location into the search bar and select the result that best applies. A new pin will be placed into the map. The location name should be a clear georeference, e.g. a country, city or address. Make adjustments to the location name if necessary. You can also adjust the position of the pin by dragging it on the map. If you want to add further details to the location, you can write a (short) description. This could include extra information about the geotag (e.g. the building name or a significant event that took place at the location) or the relevance of the place to the item (e.g. the hometown of the author). You can also add a Wikidata reference to link the location to a stable source. Search for the reference using the Wikidata fields. Once you have finished your location tag, click SAVE. You can find the place(s) tagged to the item in grey at the bottom of the Location(s) section.Step 4: Tagging
Below the Locations section is the Tagging section, where you can add the following annotations:
Document Date:
Here, you can add dates that correspond to the item. This could include the dates mentioned in the text (e.g. in diary pages), the date of a related historical event (e.g. the end of WWI), or when the item was created (e.g. from a dated signature on an illustration). You can either define this as a single date or as a longer time frame.
To tag dates to the item, write the start and end dates in DD/MM/YYYY format in the fields or select the dates by clicking on the calendar.
If you only have one date to add, insert the same date into both start and end fields.
If you don’t know the exact days, you can also tag the date on the scale of months (MM/YYYY) or years (YYYY).
Once you have finished your date tag, click SAVE DATE.
People:
People mentioned as creators or subjects in the item can also be tagged. Depending on the information you might have, you can enter the person’s first and last names, as well as their dates of birth and death. There is also the option to write a short description of the person, explaining who they are or their relevance to the item, e.g. the person’s occupation or their relation to another tagged person.
Multiple people can be tagged to one item.
Once you have finished your person tag, click SAVE.
Keywords:
Here, you can freely add keywords related to the topic and content of the item. This could include particular themes (e.g. art, music, war), subjects (e.g. children, cooking, France), or particular historical affiliations (e.g. 20th century, Austro-Hungarian Empire, Fall of the Iron Curtain).
Multiple keywords can be added and they can be written in any language.
Write your keyword tag into the field and click SAVE.
Other Sources:
External websites with information about the item’s content can be linked here. This could include links to further data about a person mentioned, a particular historical event or links to digital versions of newspapers that appear in photos or clippings in a notebook.
To add a link, click the plus next to the heading ‘Other Sources’. Enter the URL into the Link field, and write a short description of this link in the Additional Description field.
Multiple links can be tagged to one item.
Once you have finished your tag, click SAVE.
Step 5: Mark for Review
Once you have saved your contribution, the task will automatically change to the Edit status. If you think the task is finished, you can mark it for review. Note that you have to be at Runner level or above to do this (see: Miles and Levels). Click on the yellow circle next to the section heading and select Review in the list that appears. The task now needs to go under Review by another volunteer.Formatting
Use the toolbar to format your Transcription text or to add extra details to it. You can format your text using the various styles and alignment tools: Use bold for headings, and italics, underline andReview
All enrichments need to be edited and reviewed by more than one volunteer to ensure that they are as accurate as possible. Only Sprinters and Champions can edit tasks in the Review stage and mark them as Complete. (see: Miles and Levels) You can review a task (Transcription, Description, Locations, or Tagging) when the circle next to the heading is coloured orange . During the review process, pay close attention to the following requirements:-
- Transcription: The complete text in the item has been properly transcribed and the transcription is formatted as accurately as possible. The correct language(s) are selected and the transcription contains no missing or unclear icons.
-
- Description: The description is accurate and detailed (especially items without text to transcribe, e.g. photos), and the appropriate categories have been ticked.
-
- Location(s): All locations have been correctly tagged. The location name is accurate and matches the coordinates and the pin on the map. The description is clear and concise, and the Wikidata reference (if any) is correct.
-
- Tagging: Document dates are completed and as precise as possible. All mentioned people are tagged and their data is correct. All added keywords are applicable to the item, and other sources have accurate information and functioning links.
Completion Statuses
GREY |
1. NOT STARTED |
Tasks have not been started. |
YELLOW |
2. EDIT MODE |
Tasks have been started, but not yet finished. Additions and edits can still be made. |
ORANGE |
3. REVIEW |
Tasks are finished, but need final review by Sprinter or Champion transcribers. |
GREEN |
4. COMPLETED |
Tasks have been fully completed and reviewed. No further changes need to be made. |
Miles and Levels
Transcribathon is a competitive marathon. You do not enrich documents alone, but compete and work with other volunteers to ensure the quality of your work. When you first create a Transcribathon account, you only have the ability to start and edit tasks. The more you enrich documents, the closer you become to advancing to a higher level, which can unlock abilities like reviewing and completing tasks.Level | Abilities |
---|---|
Trainee | Basic abilities: start and edit tasks |
Runner | Basic abilities, mark finished tasks for review |
Sprinter | All Runner abilities, mark reviewed annotations as completed |
Champion | All Sprinter abilities, mark reviewed transcriptions as completed |
Tasks | Miles Received |
---|---|
Transcription | 1 Mile for every 300 characters transcribed |
Description | 1 Mile for every 5 Descriptions added |
Location | 1 Mile for every 5 Locations added |
Tagging | 1 Mile for every 5 Tags added |
Reviewing | 1 Mile for every 10 items marked as complete |